10GHz to 43.5GHz 12 to 19dBi Dual Polarized Quad-Ridged Horn K-Female (2.92mm) Antenna (Type: A) (HQ-1043GA-KF)

Model No: HQ-1043GA-KF

FT-RF FT-RF
B2B ONLY B2B ONLY
Freq. Range: 10 - 43.5 GHz
Antenna Type: Dual Polarized Quad-Ridged Horn
Gain: 12 - 19 dBi
Connector: 2.92mm K-Female
V.S.W.R: ≤ 2.5 : 1
Stock: 0
2026/11/19
Quantity:
INQUIRY

HQ-1043GA-KF Dual Polarized Quad-Ridged Horn Antenna

Millimeter-Wave Dual-Linear Precision | 10.0 - 43.5 GHz | Model: HQ-1043GA-KF
The HQ-1043GA-KF is a high-precision Dual Polarized Quad-Ridged Broadband Horn Antenna professionally engineered and manufactured by Fei Teng Wireless Technology Co., Ltd. (FT-RF) in Taiwan. Operating across an ultra-wide frequency spectrum from 10.0 GHz to 43.5 GHz across X, Ku, K, and Ka bands, it provides high directional gain ranging from 12 to 19 dBi with a maximum VSWR of ≤ 2.5:1. Equipped with dual precision 50-ohm 2.92mm K-Female coaxial connectors, it supports simultaneous vertical and horizontal linear polarization measurements with power handling up to 20W CW / 50W Peak. Constructed from lightweight aerospace aluminum alloy in a compact 120g form factor, this Type A horn antenna is ideally suited for millimeter-wave characterization, 5G/6G FR2 testing, radar cross-section analysis, and anechoic chamber calibrations.
Technical Specifications
Frequency Range 10.0 - 43.5 GHz
Antenna Type Dual Polarized Quad-Ridged Horn (Type: A)
Polarization Dual Linear (Vertical & Horizontal)
Gain 12 - 19 dBi
Connector Interface 2.92mm K-Female (Dual Port)
Impedance 50 Ω
V.S.W.R (Max) ≤ 2.5 : 1
Continuous Power (CW) 20 Watts
Peak Power Handling 50 Watts
Mechanical & Physical Data
Dimensions (L x W x H) 70.00 x 48.00 x 48.00 mm
Component Weight 120 g (Estimated ~107.81 g)
Mounting Interface M4 / M2.5 x 0.45 Threaded Holes
Body Material Aerospace Aluminum Alloy (Surface Treated)
Connector Material Passivated Stainless Steel
Country of Origin Taiwan
VSWR Performance Curve
Gain Calibration Plot
3 dB Beamwidth Plot
Front-to-Back Ratio Plot
Key Design & Feature Highlights

Ultra-Wideband 10 - 43.5 GHz

Delivers 12 to 19 dBi directional gain across X, Ku, K, and Ka millimeter-wave frequency bands.

Dual-Linear Polarization

Quad-ridged waveguide design supports simultaneous orthogonal vertical and horizontal measurements.

Precision 2.92mm K-Connectors

Passivated stainless steel K-Female interfaces ensure low reflection and repeatable calibration cycles.

Taiwanese Precision

Engineered and manufactured in Taiwan in a compact 120g CNC aluminum housing to meet international standards.

Contact FT-RF Engineering Division

Contact our technical engineering division today to request official quotes or customized mounting solutions.

Back to Top