10GHz to 40GHz Double Ridged Broadband Waveguide Horn K-Female Antenna (Type: A3) (HA-1040GA3-KF)

Model No: HA-1040GA3-KF

FT-RF FT-RF
B2B ONLY B2B ONLY
Freq. Range: 10 - 40 GHz
Antenna Type: Double Ridged Horn (Type: A3)
Gain: 7 - 15.5 dBi
Connector: K-Female (2.92mm)
Power Handling: 25W (CW) / 50W (Peak)
Stock: 0
2026/11/02
Quantity:
INQUIRY

HA-1040GA3-KF Double Ridged Broadband Waveguide Horn Antenna

Broadband Microwave Precision | 10.0 - 40.0 GHz | Model: HA-1040GA3-KF
The HA-1040GA3-KF is a high-performance Double Ridged Broadband Waveguide Horn Antenna professionally engineered and manufactured by Fei Teng Wireless Technology Co., Ltd. (FT-RF) in Taiwan. Operating across the 10.0 GHz to 40.0 GHz frequency spectrum, it provides stable gain performance ranging from 7 to 15.5 dBi with a typical VSWR of 2.0:1. Equipped with a precision 50-ohm 2.92mm K-Female connector interface, it supports power handling up to 25W CW / 50W Peak. Constructed from high-grade aluminum alloy with tight mechanical tolerances, this Type A3 horn antenna is ideally suited for millimeter-wave measurements, EMC/EMI compliance testing, antenna pattern characterization, and anechoic chamber calibrations.
Technical Specifications
Frequency Range 10.0 - 40.0 GHz
Antenna Type Double Ridged Broadband Horn (Type: A3)
Gain 7 - 15.5 dBi
Connector Interface 2.92mm K-Female
Impedance 50 Ω
V.S.W.R (Typical) 2.0 : 1
Continuous Power (CW) 25 Watts
Peak Power Handling 50 Watts
Mechanical & Physical Data
Dimensions (L x W x H) 123 x 80 x 50 mm
Component Weight 150 g (Estimated ~140.79 g)
Body Material Aerospace Aluminum Alloy (Surface Treated)
Connector Material Passivated Stainless Steel
Country of Origin Taiwan
Gain Calibration Plot
VSWR Performance Curve
3 dB Beamwidth Plot
Key Design & Feature Highlights

Broad Frequency Coverage

Continuous spectrum operation from 10 GHz to 40 GHz for microwave and millimeter-wave measurements.

Stainless Steel K-Connector

Precision 2.92mm K-Female interface provides repeatable microwave connection and superior mechanical durability.

Precision CNC Aluminum Body

Engineered from lightweight aerospace aluminum alloy with corrosion-resistant finish for reliable testing.

Taiwanese Precision

Engineered and manufactured in Taiwan to comply with international RF calibration and EMC testing standards.

Contact FT-RF Engineering Division

Contact our technical engineering division today to request official quotes or customized mounting solutions.

Back to Top