30MHz to 8GHz Broadband Log-Periodic N-Female Antenna (Type: A) (LO-30M08GA-NF)

Model No: LO-30M08GA-NF

FT-RF     FT-RF
B2B ONLY B2B ONLY
Freq. Range: 30 MHz - 8 GHz
Antenna Type: Log-Periodic (Type: A)
Gain: -12 to 10 dBi
Connector: N-Female
V.S.W.R: 2.0 : 1 (Typical)
Power Handling: 500W (CW) / 750W (Peak)
Stock: 0
2026/08/13
Quantity:
INQUIRY

LO-30M08GA-NF Broadband Log-Periodic Antenna

Broadband Precision Directional Antenna | 30 MHz - 8 GHz | Model: LO-30M08GA-NF
The LO-30M08GA-NF is a high-performance broadband log-periodic antenna professionally engineered and manufactured by Fei Teng Wireless Technology Co., Ltd. (FT-RF) in Taiwan. Operating across an ultra-wide spectrum from 30 MHz to 8 GHz, it provides consistent directional gain from -12 to 10 dBi with linear polarization across VHF, UHF, and microwave frequencies. Equipped with a precision 50-ohm N-Female connector interface, it handles high RF power levels up to 500W CW (30MHz-1GHz) / 100W CW (1-6GHz). Built with high-grade aluminum elements and a rigid boom for optimal mechanical durability, this Type A antenna is ideally suited for EMC/EMI radiated immunity and emissions testing, spectrum monitoring, surveillance, and laboratory RF measurements.
Technical Specifications
Frequency Range 30 MHz - 8 GHz
Antenna Type Broadband Log-Periodic (Type: A)
Polarization Linear
Gain -12 to 10 dBi
Connector Interface N-Female
Impedance 50 Ω
V.S.W.R 2.0 : 1 (Typical)
Continuous Power (CW) 500W (30MHz-1GHz) / 100W (1-6GHz)
Peak Power Handling 750W (30MHz-1GHz) / 250W (1-6GHz)
Mechanical & Physical Data
Dimensions (L x W x H) 1600.00 x 610.00 x 1151.00 mm
Component Weight 3.5 kg (Estimated ~3410.39 g)
Boom Length 1428.53 mm (Total: 1598.53 mm)
Body Material Aerospace Aluminum Alloy (Surface Treated)
Connector Material Passivated Stainless Steel
Country of Origin Taiwan
Gain Calibration Plot
3 dB Beamwidth Plot
Front-to-Back Ratio Plot
Key Design & Feature Highlights

Ultra-Wideband Coverage

Continuous frequency coverage from 30 MHz to 8 GHz for wideband spectrum analysis and compliance testing.

Precision N-Female Connector

Rugged 50-ohm RF interface ensures reliable electrical contact and repeatable measurement cycles.

Lightweight Aluminum Structure

High-grade aluminum alloy construction provides exceptional mechanical rigidity with minimized overall weight.

Taiwanese Precision

Engineered and manufactured in Taiwan to comply with international RF calibration and EMC testing standards.

Contact FT-RF Engineering Division

Contact our technical engineering division today to request official quotes or customized mounting solutions.

Back to Top